| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| More Paduck Pics " Updated " http://www-.luthiersforum.com/forum/viewtopic.php?f=10128&t=30292 |
Page 1 of 2 |
| Author: | WudWerkr [ Sat Dec 11, 2010 11:58 am ] |
| Post subject: | More Paduck Pics " Updated " |
I am currently waiting on some Super Soft II I have ordered . After breaking the second side it became clear that a new route was needed . In the meantime I have done rough work on the top and back. There is still cleanup work to be done , however the basics are there. Attachment: 100_0880.jpg Attachment: 100_0881.jpg Attachment: 100_0882.jpg Attachment: 100_0883.jpg Attachment: 100_0885.jpg Attachment: 100_0886.jpg
|
|
| Author: | Chris Oliver [ Sat Dec 11, 2010 12:03 pm ] |
| Post subject: | Re: More Paduck Pics |
|
|
|
| Author: | WudWerkr [ Sat Dec 25, 2010 3:38 pm ] |
| Post subject: | Re: More Paduck Pics |
I have been working on the fretboard and getting it ready to fret . I have encased the fretboard in Cocobolo, the 1/4" Strip running down the neck is a vertical piece . The 1/8" thick piece under the fretboard as well as the binding all glued in place will/ should make for a fairly stable neck. I HOPE The Cocobolo had more sapwood in it than I would have liked , However I dont believe that it will be to much of a factor. I am waiting to try and get some Padauk Dots for the fret board inlays . I may have to make them , but am looking around first. Attachment: 100_0888.jpg Attachment: 100_0889.jpg Attachment: 100_0890.jpg Attachment: 100_0891.jpg Attachment: 100_0892.jpg Attachment: 100_0893.jpg
|
|
| Author: | Ti-Roux [ Sat Dec 25, 2010 4:25 pm ] |
| Post subject: | Re: More Paduck Pics |
You should give a try to white glue, that dries clear... or even hide glue. Or maybe clean this glue before it get dry. |
|
| Author: | WudWerkr [ Sat Dec 25, 2010 5:02 pm ] |
| Post subject: | Re: More Paduck Pics |
I am using titebond orig. I appreciate the suggestion , i guess im not sure where u are refering to in the post . the top and back inside ? |
|
| Author: | Ti-Roux [ Sat Dec 25, 2010 5:20 pm ] |
| Post subject: | Re: More Paduck Pics |
I'm refering to the top. We see the yellow dried glue all along the braces. Once dried, Titebond is really a mess to clean up nicely. Clean it with hot wet rag when it's still fresh, it will save you a lot of trouble. |
|
| Author: | WudWerkr [ Sat Dec 25, 2010 9:01 pm ] |
| Post subject: | Re: More Paduck Pics |
Ti-Roux wrote: I'm refering to the top. We see the yellow dried glue all along the braces. Once dried, Titebond is really a mess to clean up nicely. Clean it with hot wet rag when it's still fresh, it will save you a lot of trouble. Thanks for the suggestion ! ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
|
|
| Author: | WudWerkr [ Mon Jan 03, 2011 1:39 pm ] |
| Post subject: | Re: More Paduck Pics |
Modified the fretboard a little , just to be different. And b4 anyone goes and starts accusing me of herasy ,  , I KNOW I have effectivly cut the playability to 16 frets !  I wanted to Have a Little Different design than normal , cause face it , Im not normal ! Mounted the dots " Thanks Chris" and put in frets .Attachment: 100_0904.jpg WHY IS IT That the very LAST fret wire installed is ALWAYS the one that tries and tears out ?? ![[headinwall]](./images/smilies/headbangwalluf8.gif "Mad")
|
|
| Author: | Chris Oliver [ Fri Jan 07, 2011 8:27 am ] |
| Post subject: | Re: More Paduck Pics |
Nice fret markers.. I didn't know if you would be able to see them. Don't you dare glue that fretboard on there until you fix the fretboard... remove fret, dam groove, ac glue fill with dust, sand level, clear slot, new fret, no problem! |
|
| Author: | WudWerkr [ Fri Jan 07, 2011 9:26 am ] |
| Post subject: | Re: More Paduck Pics |
To be honest Chris , I thought about taking it out and filling with glur and ebony dust , sanding flat and leaving it out . It isnt a playable fret anyway . I havent decided , It is glued in , and needs a lil more touch up . |
|
| Author: | Chris Oliver [ Sat Jan 15, 2011 6:55 pm ] |
| Post subject: | Re: More Paduck Pics |
WudWerkr wrote: To be honest Chris , I thought about taking it out and filling with glur and ebony dust , sanding flat and leaving it out . It isnt a playable fret anyway . I havent decided , It is glued in , and needs a lil more touch up . Did you get it out of there yet? |
|
| Author: | WudWerkr [ Sun Jan 16, 2011 6:26 pm ] |
| Post subject: | Re: More Paduck Pics |
No chris I havent done anymore with it in tha last week or so , I have been buffing the pearblossom and I made the pickguard . I am going to finish it out I think B4 I go any further on this one . I need Quartersawn Padauk for sides . All I have is flawsawn and I have had no sucess in bending without breaking them . I will get back on it soon though. Stop by the pearblossom thread and tell me what you think of my pick guard . |
|
| Author: | StevenWheeler [ Mon Jan 17, 2011 6:40 pm ] |
| Post subject: | Re: More Paduck Pics |
WudWerkr wrote: I need Quartersawn Padauk for sides . All I have is flawsawn and I have had no sucess in bending without breaking them. Hey Jim, Guess what i found yesterday. PM your address to me and I'll get this board in the mail to you. Steve |
|
| Author: | Chris Oliver [ Wed Mar 02, 2011 10:59 pm ] |
| Post subject: | Re: More Paduck Pics |
James.... what's going on here? The weather has stunk too much to be outside over the last month... No pressure. 
|
|
| Author: | WudWerkr [ Fri Mar 04, 2011 8:40 am ] |
| Post subject: | Re: More Paduck Pics |
Thanks for the interest chris , actually I have a wife and teenage daughter and ( 1 ) bathroom ,soooooooooooooooooo lately ive been having to go to gas station to get any quality time in bathroom it seems  I have been building a second bathroom im my basement , "just for dad" . Have cabinets in , tile laid and working on shower area .I will be back in shop sooon and look forward to posting more on it soon ! |
|
| Author: | WudWerkr [ Thu Mar 31, 2011 10:42 am ] |
| Post subject: | Re: More Paduck Pics |
I have successfully bent the Padauk sides . There are a few check marks I have to work on , but they are done. IF I EVER talk about building with this again someone shoot me !! . Actually its beautifull wood , just a pain to bend .Attachment: 100_1032.jpg Attachment: 100_1034.jpg Attachment: 100_1035.jpg Attachment: 100_1036.jpg Attachment: 100_1037.jpg
|
|
| Author: | WudWerkr [ Mon Apr 04, 2011 11:58 am ] |
| Post subject: | Re: More Paduck Pics |
Tried my hand at my first binding this weekend . I am sure I made several mistakes , but we shall see when its sanded . I used TiteBond Orig. to glue the binding . Is there a better choice? After the binding was set I set the neck and angle . Its held in right now by a drywall screw . I have found they work very well for the smaller Mando's . Attachment: 100_1038.jpg Attachment: 100_1044.jpg Attachment: 100_1045.jpg Attachment: 100_1046.jpg Attachment: 100_1048.jpg Attachment: 100_1049.jpg Attachment: 100_1050.jpg
|
|
| Author: | Chris Oliver [ Mon Apr 04, 2011 11:04 pm ] |
| Post subject: | Re: More Paduck Pics |
Lookin' good James. I use the same glue although... .I use a lot of tape to hold the binding on as I go... and use the large rubber bands after complete. Attachment: Binding-install.jpg Keep up the good work.... |
|
| Author: | WudWerkr [ Tue Apr 05, 2011 7:45 am ] |
| Post subject: | Re: More Paduck Pics Update |
I started sanding the binding and some of it came loose  Sooooooooo I rerouted the edge and started over. This time using a thick CA and ALOT more clamping / rubberbands . Also I thinned my binding so that it was virtually flush and alot thinner . We shall see if it sticks this time |
|
| Author: | Ian Cunningham [ Wed Apr 06, 2011 7:24 am ] |
| Post subject: | Re: More Paduck Pics |
Love that headstock. Can't wait to see it finished. |
|
| Author: | WudWerkr [ Thu Apr 21, 2011 2:48 pm ] |
| Post subject: | Re: More Paduck Pics " Updated " |
A few more pics of the Padauk Build Top is on , Back is on , Neck is set and the binding has been routed . Attachment: 100_1067.jpg Attachment: 100_1066.jpg Attachment: 100_1068.jpg Attachment: 100_1070.jpg The Binding will be cocobolo to match the neck and headstock |
|
| Author: | fric [ Sat Apr 23, 2011 4:08 pm ] |
| Post subject: | Re: More Paduck Pics |
WudWerkr wrote: IF I EVER talk about building with this again someone shoot me !!  I know how are you feeling |
|
| Author: | Alexandru Marian [ Sat Apr 23, 2011 4:46 pm ] |
| Post subject: | Re: More Paduck Pics " Updated " |
At what thickness did you bend? |
|
| Author: | WudWerkr [ Sat Apr 23, 2011 6:38 pm ] |
| Post subject: | Re: More Paduck Pics " Updated " |
the sides are .075 thick and I bent with a bending iron
|
|
| Author: | Alexandru Marian [ Sat Apr 23, 2011 6:55 pm ] |
| Post subject: | Re: More Paduck Pics " Updated " |
Thanks. Good to know as I have a set I might use in the near future. Very nice taptone - this wood seems to have a huge bang for the buck factor, although the color is kind of crazy. Mine doesn't feel particularly dense and I was planing 0.08 but I might go thinner now. |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|